Y. Lawrence Yao, Ph.D.
Editor
Department of Mechanical Engineering
Columbia University
500 W 120 St, 220 Mudd, MC 4703
New York, NY 10027
P: (212) 854-2887
F: (212) 854-3304
E: yly1@columbia.edu
Emily Bosco
Assistant to the Editor
P: (212) 854-7693
F: (212) 854-3304
E: eb3059@columbia.edu
 
ASSOCIATE EDITORS
ADDITIVE MANUFACTURING, DESIGN FOR MANUFACTURING, MODELLING AND SIMULATION, PROCESS PLANNING, COMPUTATIONAL METROLOGY
  • Sam Anand, Ph.D. (2022)
    University of Cincinnati
SENSING, MONITORING AND DIAGNOSTICS, MACHINE TOOL DYNAMICS, GRINDING AND ABRASIVE PROCESSES, AND MICRO- AND NANO-MACHINING AND PROCESSING
  • Satish T. Bukkapatnam, Ph.D. (2022)
    Texas A&M University
PROCESS AND SYSTEM MODELING, CAE/OPTIMIZATION, AGILE AND GREEN MANUFACTURING
  • Wayne Cai, Ph.D. (2020)
    General Motors Global R & D
LASER PROCESSES; MICRO/NANO MANUFACTURING; ADDITIVE/NON-TRADITIONAL MANUFACTURING; WELDING AND JOINING
  • Hongqiang Chen, Ph.D. (2020)
    General Electric Global Research Center
ADDITIVE MANUFACTURING, MODELING AND SIMULATION, RAPID PROTOTYPING, SOLID FREEFORM FABRICATION
  • Kevin Chou, Ph.D. (2021)
    University of Louisville, USA
SENSING, MONITORING/ DIAGNOSTICS; CONTROL/ AUTOMATION; INSPECTION/ QUALITY CONTROL, PRODUCTION SYSTEMS OPTIMIZATION
  • Dragan Djurdjanovic, Ph.D. (2020)
    University of Texas at Austin
POLYMER-COMPOSITE MATERIALS AND THEIR MANUFACTURING, JOINING AND REPAIRING; POLYMER PROCESSING
  • Martine Dubé, Ph.D. (2021)
    École de Technologie Supérieure, Canada
MACHINING, FORCE MODELING, MACHINABILITY, COMPLEX MILLING
  • Guillaume Fromentin, Ph.D. (2020)
    Arts and Metiers ParisTech
SUSTAINABLE MANUFACTURING LIFE CYCLE ENGINEERING
  • Karl Haapala, Ph.D. (2021)
    Oregon State University
ADDITIVE MANUFACTURING; INSPECTION AND QUALITY CONTROL; MACHINE LEARNING; AND CYBERMANUFACTURING
  • Qiang Huang, Ph.D. (2020)
    University of Southern California, USA
PLASTICITY AND CONSTITUTIVE MODELING: FORMABILITY; SHEET AND TUBE METAL FORMING; BULK DEFORMATION PROCESSES
  • Yannis Korkolis, Ph.D. (2021)
    Ohio State University
CONTROL AND AUTOMATION; INSPECTION AND QUALITY ASSURANCE; MACHINING PROCESSES; SENSING AND MONITORING
  • Laine Mears, Ph.D. (2021)
    Clemson University
METAL FORMING, TRIBOLOGY, NUMERICAL MODELING
  • Gracious Ngaile, Ph.D. (2019)
    North Carolina State University
PRECISION AND MICRO MACHINING; MODELING AND SIMULATION; METAL ADDITIVE MANUFACTURING; LASER PROCESSING
  • Tugrul Özel, Ph.D. (2021)
    Rutgers University
GRINDING/ ABRASIVE PROCESSES; MACHINING; SENSING/MONITORING/DIAGNOSTICS; DESIGN FOR MANUFACTURING
  • Radu Pavel, Ph.D. (2020)
    TechSolve, Inc.
ADDITIVE MANUFACTURING/3D PRINTING, MACHINING, ENERGY MANUFACTURIN
  • Johnson Samuel, Ph.D. (2020)
    Rensselaer Polytechnic
TRIBOLOGY IN MANUFACTURING, BULK DEFORMATION PROCESSES, SHEET AND TUBE FORMING, ADDITIVE MANUFACTURING, POWDER PROCESSING
  • Steven R. Schmid, Ph.D. (2022)
    University of Notre Dame, USA
MACHINING, DYNAMICS, METROLOGY, INTERFEROMETRY
  • Tony Schmitz, Ph.D. (2021)
    University of North Carolina at Charlotte
 
OFFICERS OF THE ASME
  • Richard Laudenat
    President
  • Thomas Costabile
    Executive Director
  • Robert N. Pangborn
    Secretary/Treasurer
PUBLISHING STAFF
  • Philip Di Vietro
    Managing Director, Publishing
  • Colin McAteer
    Manager, Journals
  • Jennifer Smith
    Production Coordinator
PAST EDITORS
  • Kornel F. Ehmann
  • Shiv G. Kapoor
  • David A. Dornfeld
TECHNICAL COMMITTEE ON PUBLICATIONS AND COMMUNICATIONS
  • Jane Davidson
    Chair
  • Vijay Dhir
    Vice-Chair
  • Bahram Ravani
    Chair, Board of Editors
 

Transactions of the ASME, Journal of Manufacturing Science and Engineering (ISSN 1096-6668) is published bimonthly by ASME, Two Park Avenue, New York, NY 10016. Send address changes to Transactions of the ASME, Journal of Manufacturing Science and Engineering, c/o The Sheridan Press, 450 Fame Avenue, Hanover, PA 17331.

Changes of address must be received at Society headquarters seven weeks before they are to be effective. Please send old label and new address.

Statement from by-laws. The Society shall not be responsible for statements or opinions advanced in papers or … printed in its publications (B7.1, Para 3). COPYRIGHT © by The American Society of Mechanical Engineers. For authorization to photocopy material for internal or personal use under those circumstances not falling within the fair use provisions of the Copyright Act, contact the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923, tel: +1-978-750-8400, www.copyright.com. Request for special permission to bulk copying should be addressed to Reprints /Permissions Department. Canadian Goods & Services Tax Registration #126148048.

Subscriptions: Rates/Orders - Contact ASME Customer Care at
Email: customercare@asme.org
Phone: 1-800-THE-ASME or 1-646-616-3100 (outside the Americas)
Fax: 1-973-882-5155
Mail: 150 Clove Road, 6th Floor, Little Falls, NJ 07424.

ASME Journals Claims Policy: Please make claims for missing issues in writing (email) to customercare@asme.org within six months of print date (9 months for subscribers outside the USA and Canada). Issues claimed after this time will be considered replacement copies billed at the single copy rate. Please note that replacement copies are limited. Any questions can be directed to 1-800-843-2763.

Indexing Information: Current List

Single/Multi-Site Licensing: Contact Warren Adams, Manager, Third Party Sales at adamsw@asme.org.

Reprints: Contact Tamiko Fung at fungt@asme.org.